
![]() |
Mark Sennett
Managing Editor |
![]() |
Kelly Rose
Editor |
Home> | Trade Body | >BSiF | >Over-reaction in France causes confusion regarding chemical resistant clothing |
ARTICLE
Over-reaction in France causes confusion regarding chemical resistant clothing
23 January 2013
French laboratories have tested a range of type-4 chemical protective clothing and established that problems exist with the current harmonised standards in that the test results are not always reproducible when the clothing is made from microporous materials.
French laboratories have tested a range of type-4 chemical protective clothing and established that problems exist with the current harmonised standards in that the test results are not always reproducible when the clothing is made from microporous materials. This is not wholly surprising since the current standards were designed when impervious [not microporous] materials were the norm and there has been little standards development since. Despite the fact that there are no know injuries to workers, the French government have taken the view that, in the interests of safety, they should ban these products.
Furthermore, they have asked the EU Commission to accept a safeguard clause objection to de-harmonise these standards across the EU. The BSIF believes that, on the basis that many products conform totally to the current standards and that a restriction of the free-flow of goods might result, the EU Commission has declined the French request.
There is little doubt that it would be preferable for the current standards to be revised but it is in nobody's interest to prevent suitable protection being available in the mean-time for no obvious reason. The BSIF is involved with seeking to bring the appropriate parties together to develop an interim solution and to assist its members in representations to urge the French government to think again.
Furthermore, they have asked the EU Commission to accept a safeguard clause objection to de-harmonise these standards across the EU. The BSIF believes that, on the basis that many products conform totally to the current standards and that a restriction of the free-flow of goods might result, the EU Commission has declined the French request.
There is little doubt that it would be preferable for the current standards to be revised but it is in nobody's interest to prevent suitable protection being available in the mean-time for no obvious reason. The BSIF is involved with seeking to bring the appropriate parties together to develop an interim solution and to assist its members in representations to urge the French government to think again.
MORE FROM THIS COMPANY
- Resource Waste Management Virtual Conference
- Welcome to the 2023 Guide to the British Safety Industry
- Being your own worst enemy
- BSIF Welcomes Casella Monitoring and Measurement
- Support for Exporting Activities
- News analysis - December 2018
- Use your head when buying hard hats
- BSIF will be at RWM
- The BSIF is expanding
- From the CEO's desk: Personal Protective Equipment Regulation (EU) 2016/425 – The time has come
RELATED ARTICLES
- From the Secretary's desk
- Support for Exporting Activities
- Breathe easily with Fit2Fit
- BSIF Safety Awards 2010 launched
- Ensure you purchase safe products - look for the Registered Safety Supplier shield
- PPE Regulations - where from here?
- From the Secretary's desk
- BSIF at the Safety & Health Expo
- Campaign reduces dermatitis
- Developing better codes of practice
OTHER ARTICLES IN THIS SECTION