Home >Breathing Safely
PRODUCTS & SERVICES

1/45     (1 to 20 of 896)

05 October 2022

DO YOU have workers who wear tight fitting respirators such as disposable, half mask or full-face masks? In the UK, all businesses that have workers wearing respirators are required by HSE INDG 479 to perform respirator fit testing and confirm those respirators will provide the right level of on-the-job protection needed.

[Read More]


12 September 2022

ASBESTOS IS responsible for over 5,000 deaths every single year.

[Read More]


05 September 2022

NEW FROM Shawcity, the ALERT PRO 1000 is said to be the world's first early warning device for airborne asbestos fibres.

[Read More]


05 September 2022

CASELLA WILL showcase its technologically advanced high flow pump at Safety, Health and Wellbeing Live on stand 142.

[Read More]


26 September 2022

THE NEW F-Tech Wolf, in combination with the F-Tech Fume Torch is a high quality On Torch extraction system that can be used with 2 Fume Torches simultaneously.

[Read More]


26 September 2022

AS A Gold Channel Partner with TSI, Ashtead Technology has announced the launch of the TSI BlueSky 8145 air quality monitor which measures additional gas and weather parameters compared to the standard BlueSky.

[Read More]


05 September 2022

ION SCIENCE offers a range of personal and portable gas detectors.

[Read More]


05 September 2022

THE FALCO Fixed VOC Gas Detector offers the latest in fixed PID monitoring. Featuring Typhoon Technology, preventing condensation forming on the sensor, which eliminates false readings, where other competing fixed monitors fail. Competing technology fails when condensation shorts out their electrodes, which in turn leads to false readings.

[Read More]


13 July 2022

SINCE THE start of the Covid 19 pandemic and the PPE crisis we have seen FFP masks with “ear loops” being placed on the UK market. It has been apparent for a considerable time that there was significant concern over their ability to provide an adequate seal and to protect the wearer.

[Read More]


13 July 2022

THE ION Science mercury vapour Indicator (MVI) can detect continuously mercury and Shawcity says that unlike other technologies, does not saturate or rely on waiting for gold film to regenerate.

[Read More]


13 July 2022

TSI INTRODUCES enhancements in respirable silica monitoring on its SidePak™ Personal Aerosol Monitor. Now more than ever, respirable silica is a very prevalent occupational hazard requiring worker exposure monitoring.

[Read More]


22 June 2022

JOIN JSP Safety for its Dust Kills! Webinar in support of the HSE's current campaign to tackle the correct RPE selection in the workplace. The company will also be performing a live face fit test, before and after shaving! Don't miss out on this free and insightful webinar.

[Read More]


21 June 2022

THE MERCURY vapour Indicator (MVI) from Ion Science can detect mercury continuously and, unlike other technologies, does not saturate or rely on waiting for gold film to regenerate. Ergonomically designed for simple, one-handed operation, the MVI is the ideal survey unit for rapid and reliable mercury detection.

[Read More]


14 July 2022

DESPITE ADVANCES in health and safety strategies and PPE, hydrogen sulfide was still responsible for 46 worker deaths between 2011 and 2017, according to the USA Bureau of Labour Statistics.

[Read More]


16 June 2022

ON THE 16th of June this year, National Clean Air Day is observed. Clean Air Day aims to encourage awareness of air pollution and what everyone can do to improve air quality (both indoor and outdoor) and ways to reduce pollution by making cleaner, greener choices to improve air quality for everyone.

[Read More]


21 June 2022

SEMICONDUCTORS HAVE changed the way we live and continue to play a key role in our future. As the number of production facilities increase, so the potential for harmful emissions also rises.

[Read More]


12 May 2022

ARCO IS donating over 80,000 items of essential PPE to global first responder, International Medical Corps, to aid those directly affected by the ongoing conflict in Ukraine.

[Read More]


03 May 2022

THE INDUSTRY-CHANGING ALTAIR ioTM 4 Gas Detection Wearable is now available for order from MSA Safety.

[Read More]


18 May 2022

VIRUSES CAN spread through the air via droplets and aerosols, potentially infecting other people or landing on and contaminating surfaces. Effective air filtration devices such as Rediair can help remove these microorganisms and particulates from the air, using specialised filters known as HEPA filters.

[Read More]


09 May 2022

AS HSE inspectors target woodworking businesses, Casella shares expert advice on measuring wood dust exposure.

[Read More]


1/45     (1 to 20 of 896)

FEATURES

1/4     (1 to 20 of 75)

14 September 2022

Pupils and teachers deserve to have clean air in schools. Here, Mark Bouldin explains why we all need lessons to tackle a looming crisis.

[Read More]


21 September 2022

Despite a marked increase in general awareness, fundamental misunderstandings remain when it comes to selecting and using appropriate RPE says Louise Charlton.

[Read More]


21 September 2022

Respiratory protective equipment keeps workers safe from toxic substances. Here, Ian Gil-Rodriguez introduces the Powered Air Purifying Respirator (PAPR)

[Read More]


05 October 2022

How safe are manufacturing workers from welding fumes? New findings reveal that toxic welding gases are a potential hazard to everyone, not just the welders themselves. Dominic Murphy reports.

[Read More]


14 September 2022

The food and beverage (F&B) industry includes all companies involved in processing raw food materials, as well as those packaging and distributing them. This includes fresh, prepared foods, packaged foods and both alcoholic and non-alcoholic beverages. Marion Barnham and Tracy Vernon look at gas detection in the food and beverage industry.

[Read More]


09 May 2022

As the dust starts to settle after a turbulent two years with Covid, Mark Howarth says we need to develop better foresight to ensure we are best prepared to weather the storm.

[Read More]


14 April 2022

This month we put Draeger's David Head in the spotlight to find out how he found himself working in the world of health and safety.

[Read More]


22 February 2022

The risk to the safety of people entering and working in confined spaces include flammable and explosive risk, low levels of oxygen and a range of toxic risks from gaseous toxins to solvent build ups. Here, Georgia Pratt looks at the risks and gas detection choices.

[Read More]


08 February 2022

Asbestos may be banned in dozens of countries, but it is still all around us and presents a significant hazard to anyone who may be exposed to it, says Ruth Wilkinson.

[Read More]


02 December 2021

There is an urgent need for focus on safety in renewable sector in 2022, says Paul Davidson

[Read More]


02 December 2021

Graham Wilson explores how advances in wearable technology could help prevent deaths from hazardous airborne exposure in the workplace.

[Read More]


01 December 2021

Tim Turney shares best practice advice on selecting air sampling pumps to measure personal exposure.

[Read More]


14 December 2021

Some substances are not only odourless, but invisible to the naked eye making gas monitoring critical to the safety of of workplaces. Simon Hopwood looks at the different options

[Read More]


14 December 2021

Nick Pullan reminds us that asbestos in schools and hospitals remains a threat that we mustn’t lose sight of in the shadow of COVID-19.

[Read More]


16 August 2021

There really is no room for error when it comes to using the correct gas monitoring equipment in a confined space. Kelly Rose was joined on a webinar by Tony Pereira and Doug Kemp who are experts in this field.

[Read More]


10 August 2021

George Elliott provides an insight into how to protect your workers from Respirable Crystalline Silica.

[Read More]


19 July 2021

The green hydrogen revolution is here and as many companies embrace the move to this clean energy, Jackie Marsh says you need to ensure that your gas detection is H2 ready?

[Read More]


15 June 2021

The health effects of dust should not be over-looked and it is one of the most prevalent forms of contamination encountered in the workplace. Kurt Greenall explores the dangers of this hazard and the decontamination options.

[Read More]


10 May 2021

Having spent many years in the respiratory protection equipment (RPE) industry, Fred Chartlon draws on his knowledge to provide a history of this life-saving equipment and the effect that Covid has had on manufacturers.

[Read More]


10 May 2021

The use of respiratory protective equipment (RPE) is on the increase, and with many of us using this type of equipment for the first time, Neil O’Regan takes this opportunity to explain the different options and tells you what you need to know about Fit Testing.

[Read More]


1/4     (1 to 20 of 75)

COMPANIES

1/28     (1 to 50 of 1380)

Company
3M UK Plc

SPONSORED CONTENT

1/3     (1 to 15 of 41)

16 January 2018

Touchpoint Plus is an easily configurable, wall mounted control system that supports up to sixteen channels of gas detection. Its intuitive user interface and modular approach enables you to take control and configure what you need for a wide range of applications.

[Read More]


28 September 2016

Chemsol Plus garments are manufactured from a softer, more tactile 340gm2 EPVC / Polyester fabric with additional anti-static (AS) and flame retardant (FR) properties needed for many higher risk applications. This is the fabric of choice for many safety professionals.

[Read More]


16 January 2018

The industrial GasAlertMicroClip is the world’s most popular multi-gas portable detector, delivering long runtime and reliability — plus small size, low cost and the easiest user experience.

[Read More]


27 September 2017

This industry-leading capture hood provides you with a key tool for your business.

[Read More]


21 March 2018

The Cygnus control panel combines simple installation and user control with optimum performance.

[Read More]


24 August 2017

Zehnder CleanAir 12 removes airborne dust particles from the air in industrial and commercial applications.

[Read More]


23 September 2015

Indoor and environmental monitoring

[Read More]


24 August 2017

Zehnder CleanAir 3 removes airborne dust particles from the air in industrial and commercial applications.

[Read More]


16 January 2018

The Microdust Pro is a real-time hand-held, data logging instrument for the detection of airborne dusts, fumes and aerosols.

[Read More]


28 January 2022

The Corpro HM1400 half mask is a lightweight, comfortable reusable respirator that provides protection against hazardous airborne contaminants.

[Read More]


30 July 2013

Why buying a 3M respirator means more than simply purchasing a product

[Read More]


10 September 2020

IN THE UK, workers required to wear respiratory protection are also required to pass an annual respirator fit test.

[Read More]


01 May 2013

By wearing the Tango™ TX1, your workers will be the safest single gas monitor users in the world. A 3-year runtime and patent pending DualSense™ Technology increases worker safety, regardless of bump test frequency, while reducing overall costs.

[Read More]


28 September 2016

Chemmaster suits are tough and uncompromising, with exceptional chemical resistant properties against many acids and alkalis. They are ideal for a wide variety of chemical handling operations and have been widely regarded as the industry standard for over 30 years.

[Read More]


23 September 2015

300 products detecting 28 gases

[Read More]


1/3     (1 to 15 of 41)

VIDEOS OF THE MONTH