Home>Handling & Storing>Electric Vehicles>Pedestrian trucks on show
ARTICLE

Pedestrian trucks on show

13 April 2017

At Scotland Works, Combilift will focus on its growing range of walk behind stacker trucks. Where possible and depending on the loads to be handled, there is a growing preference for pedestrian trucks due to the reduced risk that they pose to the operator and any others who may be in the vicinity.

The Combi-WR4 multidirectional reach stacker and the Combi-CS counterbalanced stacker have been designed to ensure space saving and productive operations. They are also able to work in the narrowest aisles for machines of their type. 

A key feature of both models is the multi-position tiller arm, developed and patented by Combilift. It can be turned to the left or right of the unit to position the rear wheel, allowing the operator to remain at the side of the machine rather than at the rear as is the case with other pedestrian stackers. This position eliminates the risk of operators being trapped or crushed between the back of the machine and racking when picking and placing loads in narrow aisles and avoids the need for the operator to look through the mast, thus enhancing visibility.

The Combi-CS has a load capacity of 1000kg @ 500mm, with a 2.5m mast with mast tilt as standard.  The Combi-WR4 is available with various lift heights and a load capacity of 1,450kg. Both models benefit from electronic power steering, precise fingertip controls and a display unit fitted on the tiller arm, making them easy to operate.

http://www.scotlandworks.com

Stand HS118

 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
TWITTER FEED
 
//