Home >PPE>Head Protection
PRODUCTS & SERVICES

1/7     (1 to 20 of 125)

13 August 2019

EVO VISTA is a feature-rich helmet that incorporates a retractable optical class 1 faceshield or overspec.

[Read More]


13 August 2019

The Hultafors Group has added Hellberg Safety PPE products to its premium brand portfolio for professional tradesmen and women.

[Read More]


13 June 2019

The new EVO®VISTA™ Helmet is an innovative next generation feature rich helmet which incorporates a fully retractable optical class 1 faceshield or overspec within the helmet.

[Read More]


23 May 2019

Weighing less than 135g, the HardCap AeroLite full shell bump cap from JSP does not compromise on performance.

[Read More]


27 March 2019

The HardCap AeroLite® from JSP is the lightest, best performing, full shell Bump Cap on the market weighing less than 135g without compromising on performance.

[Read More]


18 February 2019

Award-winning safety helmet manufacturer ENHA – part of Globus Group – has launched two specialist helmets into the UK market to protect against the threat of short-term contact with electrical conductors, arc flash and molten metal splashes.

[Read More]


10 December 2018

Award-winning safety helmet manufacturer ENHA – part of Globus Group - has launched two specialist helmets into the UK market to protect against the threat of short-term contact with electrical conductors, arc flash and molten metal splashes.

[Read More]


04 December 2018

Eng-Weld has three pointers on what to look for when choosing a welding helmet.

[Read More]


15 November 2018

THE POWERCAP Infinity is the very latest in Powered Air Purifying Respiratory technology offering 4 in 1 fully integrated protection to the head, eye/face, hearing and respiratory protection in one intuitive lightweight head mounted unit.

[Read More]


29 October 2018

As the colder weather sets in, JSP says it has the answer to keeping your head warm on construction sites or trackside in the Surefit Thermal Helmet Liner, which is fully approved to be worn with the JSP EVO range of safety helmets. 

[Read More]


02 March 2018

JSP's EVO5 Dualswitch is the only helmet which is certified to both EN397 and EN12492 on one certificate, with the ability to change between the two standards easily at the flick of a switch.

[Read More]


02 March 2018

ESAB Welding & Cutting Products has unveiled its F&G range of helmets the F20, G30, G40 and G50, which uniquely cover welding, cutting and grinding applications with their flip-up visor design.

[Read More]


19 January 2018

ESAB Welding and Cutting Products has introduced new Sentinel A50 Air high-performance automatic welding helmets.

[Read More]


05 January 2018

Europe’s multi award-winning range of safety helmets by ENHA are now available in the UK and Ireland thanks to worker safety specialist Alpha Solway, part of Globus Group.

[Read More]


03 January 2018

Europe’s award-winning range of safety helmets by ENHA are now available in the UK and Ireland thanks to worker safety specialist Alpha Solway, part of Globus Group.

[Read More]


13 December 2017

Centurion, the above-the-neck personal protective equipment specialist, has been awarded the Design Foundations Grant by the Technology Strategy Board of Innovate UK.

[Read More]


01 November 2017

Centurion, the above-the-neck personal protective equipment specialist, has released a new white paper in partnership with the University of Warwick, that clarifies the differences between two of the most common materials used in helmet and cap protection systems.

[Read More]


01 November 2017

By using the Visilite, JSP’s lighting system for its EVO industrial safety helmets, the problem of gloomy and dim light at work can easily be avoided. The Visilite is a flexible, durable fibre optic lighting system that increases worker visibility without dazzling colleagues.

[Read More]


23 October 2017

Scott Safety, the designer and manufacturer of respiratory and respiratory protective equipment (RPE), returned to the A+A trade event to showcase its market leading solutions in the areas of construction, silica dust, confined spaces, industrial firefighting and gas detection.

[Read More]


19 September 2017

The doseBadge5 noise dosimeter is now available with octave bands filters allowing for effective and accurate selection that enhances employee hearing protection.

[Read More]


1/7     (1 to 20 of 125)

FEATURES

1/1     (1 to 14 of 14)

07 March 2019

Industrial helmets, high performance helmets and bump caps are commonly used on construction sites throughout the world, John-Mark Edmundson explains the standards relating to this key head protection.

[Read More]


07 March 2019

Ian Goodhead discusses Winvic's internal policies on head protection and task specific PPE.

[Read More]


29 January 2019

One of the most essential ways of keeping people safe in the workplace is with above-the-neck PPE, so Matthew Judson explores what's new in the market.

[Read More]


04 October 2018

HSM Managing Editor Mark Sennett sat down with JSP chief executive Mark Johnstone to reflect on spending nearly two decades in the health and safety sector.

[Read More]


11 September 2018

Mackenzie Peters explores the importance of identifying and understanding the hazards on your worksite and choosing the right hard hat for the job.

[Read More]


01 June 2018

Head trauma has become a hot topic in recent years, particularly in the sports world, as a growing body of research suggests even minor concussion and one-off impacts to the head can cause serious and long term health issues. Georgina Bisby examines the latest research and considers the wider implications for head protection

[Read More]


24 January 2018

Georgina Bisby investigates the challenges and opportunities around smart technology in above-the-neck PPE

[Read More]


20 September 2017

Above the neck PPE specialist, Centurion has carried out extensive research that reveals style is the fourth major trigger for customers changing a helmet or brand, after cost, comfort, and change in company policy requirements.

[Read More]


19 September 2017

JSP, Europe’s independent manufacturer of above-the-neck personal protective equipment (PPE), was first past the post in the UK and Europe after being awarded BSI Certification to the new PPE Regulation for a range of protective products.

[Read More]


17 April 2017

The following companies were awarded a Commended Award for the BSIF Product Innovation Awards 2017.

[Read More]


23 January 2017

MSA's Anita Stellbaum, industry segment marketing manager, and Gary Bendoris, industry sales leader UK & Ireland, examine trends, developments and drivers of growth in the European Above the neck PPE market.

[Read More]


08 April 2016

When selecting earmuffs to use with a safety helmet, once products with the correct performance are established, it is understandable that users will have their favourite models, probably based on comfort.

[Read More]


25 June 2015

Matthew Judson, technical director at JSP demonstrates how difficult it can be to select the correct head protection for a specific situation. In the scenario below, which helmet would you select?

[Read More]


 border=
23 January 2013

Matthew Judson makes the case for incorporating retro reflective material into protective helmets....

[Read More]


1/1     (1 to 14 of 14)

SPONSORED CONTENT

20 September 2017

Bollé Safety, a world leader in the design and manufacture of protective eyewear, will be launching a new version of the market leading Pilot goggle at this year’s exhibition, a new versatile, high impact protection safety goggle.

[Read More]


13 March 2019

Conforms to EN 471 Class 3 and RIS-3279-TOM and EN 343 3:3.

[Read More]


08 March 2013

The NEW-TECH Welding Shield is approved for use with the Concept reduced peak safety helmet when fitted in conjunction with the Speedy Loop, which enables the welding shield to be easily and quickly fitted on to the Concept helmet.

[Read More]


08 March 2013

All the features of the classic Reflex helmet plus:

[Read More]


VIDEOS OF THE MONTH