Mark Sennett
Managing Editor |
Kelly Rose
Editor |
Home> | Plant & Machinery | >General Plant & Machinery | >Waste and recycling company fined for failings |
Home> | Premises | >Waste | >Waste and recycling company fined for failings |
Waste and recycling company fined for failings
01 March 2021
A SOUTHPORT waste and recycling company has been fined after an employee sustained serious injuries to his arm when it became entangled in the automatic roof sheeting mechanism of a visiting articulated truck.
Liverpool Magistrates’ Court heard how, on 24 April 2019, the 22-year-old labourer had been working at Johnsons Scrap Metal Limited, assisting in loading a 44 tonne articulated third party vehicle with waste wood. He climbed onto the truck and while standing on the load, he manually levelled some wood that had prevented the automatic roof sheet from completely covering the load. As he was climbing back over the load to get down from the truck, the automatic sheeting device was inadvertently activated, trapping the worker’s arm in the mechanism, resulting in injuries that included a broken arm, that later needed surgery to put two metal plates in place, and tendon damage.
An investigation by the Health and Safety Executive (HSE) found that Johnsons Scrap Metal Limited failed to assess the risks in relation to vehicles visiting the site and to take effective measures to prevent employees from accessing third party vehicles. The company did not provide adequate information, instruction, training and supervision to employees and failed to implement risk control measures to ensure their safety when dealing with third party vehicles.
Johnsons Scrap Metal Limited of Crowland Street, Southport, Merseyside, pleaded guilty to breaching section 2(1) of the Health and Safety at Work etc. Act 1974. The company was fined £10,000 and ordered to pay costs of £4,000.
HSE inspector Emily Osborne said after the hearing, “This incident and the resulting injury was entirely preventable had the risk in relation to visiting vehicles been assessed and suitable control measures put in place. Those in control of a workplace have a responsibility to identify and devise safe methods of working, and to provide the necessary information, instruction and training to their workers.”
- Call for employers to pay up
- £120,000 fine after worker crushes arm
- Council and bus company fined six figures
- Construction company in the dock after fall from height
- Company fined after admitting safety failures
- Construction firm and director fined for safety breaches
- Concerns asbestos regulations could be abolished
- Clothing company fined after worker hit by forklift
- Construction firm fined after worker dies from fall
- BSIF provides supply chain update