
![]() |
Mark Sennett
Managing Editor |
![]() |
Kelly Rose
Editor |
Home> | Trade Body | >BSiF | >CEO's desk - May 2021 |
CEO's desk - May 2021
04 May 2021
BSIF PPE Conference 2021 has only just taken place, so Alan Murray reviews the event, which you can watch on demand.

Following the tumultuous events of 2020 the British Safety Industry Federation (BSIF) and the Safety Industry chose to run a virtual conference to highlight the role of Personal Protective Equipment (PPE) as a control measure, in an effective safety and health policy, and indeed the efforts that exist in the market to ensure that quality fit for prupose product is provided through a capable supply chain.
The date of April 28th was chosen to coincide with the date, which would have seen us all together at the National Health and Safety Event at the NEC which has, because of restrictions, had to be postponed until the 7 September. April 28 was also the International Workers Memorial Day, so the timing seemed very apt.
Notwithstanding the specific date, the market is now looking forward with optimism to the return to work and with the events of 2020 raising the profile of PPE in the public consciousness it was the opportune time to remind ourselves of the way that things should be. The timing is also appropriate as we are now at an end of the product easements and derogations from the Regulation 2016/425 brought in to ease the burden of PPE shortages during the pandemic. Further we are now out of the EU and faced with the changes under the UK Conformity Assessment regime.
The early months of the pandemic and the break down of traditional PPE supply chains saw the influx of a huge amount of non compliant product being imported by businesses with little or no knowledge of the Regulatory framework and during the year BSIF provided vital intel to the authorities, reporting over 350 products and traders who required investigation. This reporting went to the Office for Product Safety and Standards (OPSS) the Health and Safety Executive (HSE) Trading Standards (TS) and the Medicines and Healthcare products Regulatory Authority (MHRA). MHRA was involved as there were many products which were crossing over in their purpose, between PPE and Medical Devices. All of the presentations can be viewed again by going to HSM Search at https://sees.evessiocloud.com/live/en/page/home and registering for the conference.
Following a short welcome by Alan Murray of the BSIF, the Conference was opened by a keynote speech from Sarah Albon, Chief Executive of the HSE, who covered a review of their activities during the challenges of Covid and the day to day work involved in the HSE delivering on its Regulatory responsibilities, including the setting up of specific resources to bring policy and regulatory responsibilities into one unit. While highlighting the role that PPE plays in keeping workers safe Sarah also referenced the collaborative working between HSE and BSIF at several levels including participation in the BSIF Special Interest Groups (SIGs). The opening keynote led directly, in terms of message and content into the next session on market surveillance.
Following the HSE Chief Executive we saw a joint session on Market Surveillance from the leads of the two responsible authorities HSE and TS. HSE are challenged with market surveillance of PPE when it is used at work, with that responsibility falling to TS when product is being supplied to “private individuals”. The HSE element was presented by Harvey Wild, Head of the HSE Virtual PPE Unit. The presentation outlined the current and future activities of HSE in this area. Harvey Wild explained the HSE’s role during Covid and the regulatory easements supported by a PPE triage and technical team underpinning the decision making unit who were charged with releasing only safe PPE to the market. Harvey told the audience that during this period the HSE had been agreed 895 requests for easement release and that 231 in-market investigations on non compliant PPE had been and are being undertaken. So far there have been 18 withdrawal demands and 2 recall notices raised.
Going forward HSE have created the Product Safety Market Surveillance Unit (PSMSU) which will lead on workplace regulation and equipment. This unit will take responsibility for a range of Regulations including the PPE Regulation. We were also informed of the new reporting function, the Concern and Advice Team (CAT) along with a link to utilise this service.
For Trading Standards, Vicki Burch of Hertfordshire TS, Primary Authority partner of BSIF spoke on the PPE Regulation and the involvement of TS. Vicki was keen to stress that in addition to the duty to enforce regulation TS also provided advice to wide ranging businesses on achieving compliance. The relationships with other TS organisations were outlined and the difficulty of achieving a national approach was stressed. During the presentation we saw detailed information on the PPE related work focussing first on the Covid items including KN95 masks, before the other general areas of activity were outlined including work on Motorcycle Clothing, Hand Protection, Safety Footwear and Cricket equipment, all in conjunction with BSIF.
The opportunity for the audience to hear directly from the market surveilllance authorities was greatly appreciated as was their willingness to answer questions posed. However, there can be no doubt that a historically passive approach to enforcing regulatory compliance in PPE needs to change. The situation that the industry faces was then brought into sharp focus through the presentation on the Registered Safety Supplier Scheme by Roy Wilders of the BSIF.
In his presentation Roy was clear on the role that quality PPE and capable suppliers play in effective safety and health management, a message that those in the industry know of course, but Roy brought this home by taking the audience back through the audit results of 2020 covering auditing and testing with members and with non members. In the results of the audits we saw that even within the membership 15% of product audits resulted in non compliances. Happily all these were quickly resolved and the members further invigorated in their commitment to self policing. On the other hand when we look at results from market testing with non members, where BSIF have no opportunity to sanction, we see that the failure rate is 38% of the 98 products tested, and if we add in non compliance due to missing documentation, as required by the Regulation, this failure level goes up to 100%. Roy then took the opportunity to report on what he called a “Super Market Sweep”, where he and a colleague, restricted to one hour, purchased 27 pieces of PPE across the product ranges, from on - line market places or trader’s own web sites, with 19 of these products found to be non compliant. The challenge of on-line selling of PPE is the responsibility of the authorities but clearly their lack of success is leaving wearers exposed to risk of unsafe product. This presentation ended with a timely reminder that while anyone is allowed to sell PPE and safety products purchasers need to source intelligently, from capable suppliers.
RPE Face Fit Testing and the Fit2Fit Scheme overview was presented by Nick Baxter from the HSE Science Division, supported by Alan Murray of BSIF. The session covered why tight fitting Respiratory Protective Equipment must be fit tested, contrasting the HSE annual fatality figures of 111 deaths from workplace accidents with the 12,000 deaths a year from occupational lung disease. The session which included some informative videos covered what must be fit tested, why, the legal duties and what happens if a face mask does not fit a wearer. In the presentation an explanation was given as to the accepted methods of face fitting and the need to have these carried out competently.
The key messages of the morning sessions were taken forward to the afternoon keynote speech from Sarah Smith, deputy CEO of OPSS, the government agency who own policy for product safety in all sectors in this country. Sarah spoke of recent experiences and the situation of PPE hitherto an established product category supplied in the main through traditional channels and the new difficulties of this regulated category being supplied by new entrants, with no knowledge of the regulation or the product range they were marketing. Sarah reminded the audience that we are now in a post EU world and OPSS are looking for comment in the consultation on the future of the product safety framework. Comment can be submitted through this link https://www.gov.uk/government/consultations/uk-product-safety-review-call-for-evidence The observation was put to Sarah that while the existing framework is believed to be fit for purpose its value is undermined by a light touch, passive approach to enforcement. Various other pertinent questions were raised which can be seen by looking back at the conference speech on the HSM website.
Continuing the theme of PPE in a post EU controlled UK market, Euan Fraser Head of Engineering and Technical Services at OPSS took the audience through the Regulators guide to UKCA and PPE, illustrating some helpful worked examples for both the GB and NI markets. With questions being necessarily restricted, BSIF would like to give notice that we will hold another UKCA webinar covering “Where are we Now”. Details will come out very shortly.
Following on from the 2nd OPSS presentation of the day, the conference then heard from the Chairs of all of the BSIF Special Interest Groups (SIGS) which are involved with PPE. The members of the SIGs are drawn from across BSIF, and the groups are dedicated to work on standards development, issue resolution and the creation of guidance for end users who have chosen to utilise PPE as part of their safety and health management policies. The audience heard presentations from the chairs of the groups involved in Protective Gloves and Clothing, Eye Face Hearing and Head Protection, Safety Footwear, Height Safety and Respiratory Protection with a final presentation from the Chair of the BSIF Test and Certification Association whose membership comes from the UKCA Approved Bodies and UKAS approved Test Houses, drawing the Regulatory requirements of PPE together.
A great session illustrating the value and dedication of these groups to safety provided by PPE and its proper use. The SIGs took the opportunity to highlight their work on guidance for end users some of which is illustrated below.
This concluded a thought provoking day, highlighting the value of good PPE and the capability the market should expect from the supply chain.
Alan Murray is chief executive at BSIF. For more information, visit www.bsif.co.uk
- The time is near - BSIF Safety Awards deadline for entries is fast approaching
- Fit2Fit scheme & ISRP host joint event
- In the spotlight with Dale Stokes
- BSIF Safety Excellence award winners: dorsaVi
- And the winners are...
- Latest BSIF members
- Best Practice in Spill Prevention in The Waste Management Industry Report now available
- From the CEO's Desk
- BSIF Safety Awards entry deadline approaches
- From the CEO’s Desk
- From the Secretary's desk
- Support for Exporting Activities
- Breathe easily with Fit2Fit
- BSIF Safety Awards 2010 launched
- Ensure you purchase safe products - look for the Registered Safety Supplier shield
- PPE Regulations - where from here?
- From the Secretary's desk
- BSIF at the Safety & Health Expo
- Campaign reduces dermatitis
- Developing better codes of practice