
![]() |
Mark Sennett
Managing Editor |
![]() |
Kelly Rose
Editor |
Home> | Industry Update | >Company News | >Scissor lift safety warning following fatal overturns |
ARTICLE
Scissor lift safety warning following fatal overturns
23 January 2013
Users of certain types of scissor lifts are being advised to make daily safety checks after five people were killed in three separate incidents when they overturned...
Users of certain types of scissor lifts are being advised to make daily safety checks after five people were killed in three separate incidents when they overturned.
A safety alert has been issued by the Health and Safety Executive (HSE) to warn service and maintenance engineers and those in the construction industry who use, or lease out, JLG 500RTS and 400 RTS scissor lifts, to ensure that safety critical components are working correctly.
In all three fatal overturn incidents in Europe over the past four years:-
• The oscillating axle which allows the machine to be driven on uneven ground with the platform in the transport position failed to lock when the platform was raised.
• The lift/drive interlock system did not work allowing the platform to be elevated above 6.7m without the stabilisers being deployed.
• Owners of both these types of scissor lifts are being advised to ensure that the oscillating axle lockout system and the lift/drive cut out switches are checked for correct functioning (in accordance with the manufacturer's recommendations) before the machine is next used and that users complete daily inspections and function testing of both elements.
“Though this safety alert is primarily to warn those who own and use these specific models of scissor lift, and those with similar interlock systems, it should serve as a reminder to all users of mobile elevating work platforms that there is a need to regularly maintain, inspect and test the equipment. This isn't just recommended by manufacturers but is also required by law," said HSE inspector Richard Clarke.
“Used as directed and with all the necessary checks, we continue to recommend the appropriate use of mobile elevating work platforms as a tool to enable work at height to be carried out safely.â€
The safety alert can be viewed in full at www.hse.gov.uk/safetybulletins/scissorlifts.htm
A safety alert has been issued by the Health and Safety Executive (HSE) to warn service and maintenance engineers and those in the construction industry who use, or lease out, JLG 500RTS and 400 RTS scissor lifts, to ensure that safety critical components are working correctly.
In all three fatal overturn incidents in Europe over the past four years:-
• The oscillating axle which allows the machine to be driven on uneven ground with the platform in the transport position failed to lock when the platform was raised.
• The lift/drive interlock system did not work allowing the platform to be elevated above 6.7m without the stabilisers being deployed.
• Owners of both these types of scissor lifts are being advised to ensure that the oscillating axle lockout system and the lift/drive cut out switches are checked for correct functioning (in accordance with the manufacturer's recommendations) before the machine is next used and that users complete daily inspections and function testing of both elements.
“Though this safety alert is primarily to warn those who own and use these specific models of scissor lift, and those with similar interlock systems, it should serve as a reminder to all users of mobile elevating work platforms that there is a need to regularly maintain, inspect and test the equipment. This isn't just recommended by manufacturers but is also required by law," said HSE inspector Richard Clarke.
“Used as directed and with all the necessary checks, we continue to recommend the appropriate use of mobile elevating work platforms as a tool to enable work at height to be carried out safely.â€
The safety alert can be viewed in full at www.hse.gov.uk/safetybulletins/scissorlifts.htm
MORE FROM THIS COMPANY
- HSE welcomes Lofstedt review
- Recycling firm fined after worker crushed to death
- HSE myth busters tackle 150 crackpot cases in one year
- Shell ordered to pay £1.5m over Bacton gas explosion
- Lead poisoning leads to court for stained glass firm owner
- '20 minute' risk asessment for low hazard workplaces
- Subsidised training available as part of new campaign
- Cleaning firm fined over porter's death at Bolton hospital
- HSE issues reminder of the risks and precautions associated with tank cleaning operations
- Watersports club & roadworks firm charged with corporate manslaughter
OTHER ARTICLES IN THIS SECTION