Mark Sennett
Managing Editor |
Kelly Rose
Editor |
Home> | Plant & Machinery | >General Plant & Machinery | >Agency worker injured by unguarded machinery |
Home> | Plant & Machinery | >Physical Guarding | >Agency worker injured by unguarded machinery |
Agency worker injured by unguarded machinery
07 August 2019
A COMPANY that manufactures absorbent products has been fined after an agency worker suffered a life-changing injury to her hand when it was caught in a rotating fan blade.
Manchester Magistrates’ Court heard how, on 18t October 2017, the 34-year-old agency worker had been working her second shift at the NPS Worldwide UK Limited site at Oldham. While removing a blockage inside the filling machine she had been operating, her fingers became caught in an unguarded rotating fan. The agency worker lost parts of all of her fingers on her right hand, sustained extensive scarring to her stomach following an unsuccessful attempt to generate new skin growth to save her fingers, and continues to suffer post-traumatic stress disorder as a result of the incident and the injuries sustained.
An investigation by the Health and Safety Executive (HSE) found the fan had not been suitably guarded, putting employees and agency workers at risk. The company had failed to carry out a suitable risk assessment and provide adequate information, instruction and training to workers. No first aid provision was available on the night shift when the incident occurred, and this contributed to the injured person suffering further as incorrect first aid was administered.
NPS Worldwide UK Limited of Vulcan Business Park, Derker Street, Oldham, pleaded guilty to breaching Section 2(1) and 3(1) of the Health and Safety at Work etc. Act 1974 and Regulation 3(2) of the Health and Safety (First Aid) Regulations 1981. The company was fined £28,000 and ordered to pay costs of £7,771.
HSE inspector Sharon Butler said after the hearing, “This injury could have easily been prevented and the risk should have been identified.
“Employers must make sure they properly assess and apply effective control measures to minimise the risk from dangerous parts of machinery.”
- Shipping company fined after worker paralysed
- Waste and recycling company fined for failings
- Research reveals drivers swich off vital safey features
- New tool to help prevent MSDs
- NEBOSH and HSE incident investigation qualification
- Recommendations to reduce farming fatalities
- Survey shows shift in workplace hygiene habits
- Officers set to use body-worn cameras
- Five figure fine after employee loses arm
- Firm fined after young worker falls