Animal feed company fined £500k after worker injured

William Thompson (York) Limited pleaded guilty after failing to prevent access to a rotating auger – a tool consisting of a central shaft with a blade wrapped around it – which is designed to transport excess feed away from a press.

The 41-year-old had been working as a supervisor at the company’s Jubilee Mill site in York on 14 November 2023. At the time of the incident, the man had been trying to resolve a maintenance issue with the machinery. However, he was able to open the press while its parts remained in operation at significant speed. His foot became entangled in the rotating auger and he sustained injuries so serious he remained in hospital for a period of six weeks.

An investigation by the Health and Safety Executive (HSE) found that William Thompson (York) Limited failed to prevent access to dangerous parts of the machinery and also to carry out a suitable risk assessment of the work being done.

A CCTV still shows only two bars of guarding above the auger – this allowed the worker’s foot to slip through to the blade below

HSE guidance states employers must take effective measures to prevent access to dangerous parts of machinery. This will normally be by fixed guarding but where routine access is needed, interlocked guards may be needed to stop the movement of dangerous parts before a person can reach the danger zone. Further guidance can be found here: Provision and Use of Work Equipment Regulations 1998 (PUWER) – HSE.

William Thompson (York) Limited, of Main Street, Malton, North Yorkshire, pleaded guilty to breaching Section 2(1) of the Health and Safety at Work Act etc 1974. The company was fined £500,000 and ordered to pay £4,455 in costs at York Magistrates court on 18 November 2025.

HSE Inspector Shauna Halstead said: “This company’s failures resulted in a man sustaining life-changing injuries.

“Too many workers are injured or killed every year because of failures to guard dangerous parts of machinery.

“Companies must implement safe working practices when carrying out maintenance operations.

“We will not hesitate to take action against companies which do not do all they should to keep people safe when working with machinery.

This HSE prosecution was brought by HSE enforcement lawyer Arfaq Nabi and paralegal officer Sarah Thomas.