Kee Safety Limited, On store protection

Health & Safety Matters

hsmsearch.com


	What next? Request further Information visit web site Send to friend Kee Safety Limited company's profile

Click to visit sponsors web site

On store protection
February 1st 2006

Ikea has specified a modular, freestanding roof edge protection system from Kee Klamp SAS to protect employees and contractors working at roof level at one of its five Paris stores.

Once assembled, the KeeGuard system offers year-round, freestanding roof edge protection. It is fitted on the showroom roof, with a further section fitted above the stock and tills area of the main store building. In the event of any inadvertent slips or trips, workers can be sure that the system will provide a permanent safety barrier.

Quick and easy to erect, all assemblies are designed for use with 42.4 and 48.3 o/d tubing and standard fittings from the Kee Klamp range. There is no need for welding, drilling, threading or bolting; the only tools needed for installation are a wrench with a standard hex key to lock the integral set screw of each fitting onto the assembly components.

The system can also be designed for use on runs of less than 6m where no wall fixing is available.

More articles from Kee Safety Limited:

Safety at a high level (1st October 2008)

In a move designed to make maintenance work on roofs safer, quicker and more costeffective, Kee Safety has introduced the Kee Roofpoint range of Class A1, A2 and supports for Class C roof anchor points.

From Managing safety

Safety at a high level (1st October 2008)

In a move designed to make maintenance work on roofs safer, quicker and more costeffective, Kee Safety has introduced the Kee Roofpoint range of Class A1, A2 and supports for Class C roof anchor points.

From Slips trips falls

Anchor Range (1st October 2008)

Kee Safety has introduced the Kee Anchor range of Class B, E and supports for Class C roof anchor devices for the personal protection of workers carrying out roof level maintenance.

From Slips trips falls

Fitting Solution (1st August 2008)

Kee Safety has developed its Kee Access range of cast iron fittings to help satisfy the requirements of the Disability Discrimination Act and Building Regulations Pt.

From Slips trips falls

Take it from the top (1st June 2008)

With falls from height the most common cause of workplace injury and fatality in the UK, the HSE is continuing to urge companies to make rooftop safety a priority. Vernon Barry, UK General Manager of Kee Safety, takes a look at the latest information and advice from the HSE and outlines the importance of making the right choice in safety systems

From Construction site safety

Kee klamp becomes kee safety (1st April 2008)

Kee Klamp has announced that it will now operate as Kee Safety.

From Safety first

Roof edge protection (1st April 2008)

Kee Safety has provided its KeeGuard roof edge protection system at Calderstones NHS Trust in Lancashire. The system has been fitted to provide effective protection for maintenance crews accessing the roof.

From Slips trips falls

Free standing fall protection (1st April 2008)

The Safety Systems range from Kee Safety provides secure protection for workers involved in rooftop construction and maintenance tasks. The range incorporates KeeGuard, Kee Dome and Kee Anchor. The Kee Mark safe dema

From Slips trips falls

Temporary handrailing (1st December 2007)

Temporary handrailing structures assembled using fittings from Kee Klamp are helping ensure the smoothrunning of Shepherds Bush Underground Station during major renovation work.

From Slips trips falls

Winner at Whittington (1st October 2007)

Kee Klamp has helped Islington Council meet the requirements of the Disability Discrimination Act with a new tubular handrail system at Whittington Park, created using components from its 500 Series.

From Slips trips falls

Wide range of colours (1st August 2007)

Kee Klamp now offers the option of a polyester powder coated finish in the full range of RAL colours for its Kee Klamp fittings, corrosionresistant Kee Lite and DDA compliant 500 Series.

The Kee Klamp fitting range, for exam

From Slips trips falls

Wide range of colours (1st August 2007)

Kee Klamp now offers the option of a polyester powder coated finish in the full range of RAL colours for its Kee Klamp fittings, corrosionresistant Kee Lite and DDA compliant 500 Series.

The Kee Klamp fitting range, for exam

From Slips trips falls

Anti-bacterial coating added to fittings (1st June 2007)

An anti-bacterial powder coating has been introduced by Kee Klamp to provide extra protection for its 500 DDA Series and other product ranges.

From Slips trips falls

Balustrading system gets a good report (1st April 2007)

Access at King Henry VIII School in Abergavenny is safer and easier for pupils, following the installation of a Keenect balustrading system from Kee Klamp.

Safety and improved access in line with the requirements of the DDA

From Premises

Speedy installation for guardrailing modules (1st April 2007)

Kee Klamp Guardrail Modules are designed to make the specification and installation of guardrailing quicker and easier.

Available in a variety of sizes and styles to suit individual project requirements, modules consist of a

From Slips trips falls

Fitting additions help cut installation time (1st February 2007)

Kee Klamp has added new products to three of its ranges to help reduce installation time and improve structure aesthetics.

The company has extended its Kee Klamp fitting range for tubular structure construction and its Kee L

From Slips trips falls

Making court safer (1st February 2007)

Helping to meet the requirements of the Disability Discrimination Act, fittings from Kee Klamp's 500 Series have been used to construct a new handrailing structure that runs alongside stairways and ramps at the main entrance

From Slips trips falls

Protective barriers (1st December 2006)

A new toeboard component has been added by Kee Klamp to its KeeGuard edge protection system.

To ease the installation of rooftop toeboards, an aluminium extrusion has been designed that can now be supplied with the KeeGuard

From Construction site safety

Top class access for school project (1st October 2006)

In a recent project to improve safety, Kee Klamp has provided fittings for the construction of new pedestrian safety guardrailing at Paxton Primary school in South East London.

The project included installation of two ramp w

From Premises

Edging safety forward (1st August 2006)

Effective roof edge protection is a priority for those working at height on flat roofs. John Thelwell of Kee Klamp outlines the importance for health and safety professionals of the correct choice of system

From Slips trips falls

Rooflight safety (1st June 2006)

Available from Kee Klamp, Kee Dome is a free-standing fall protection solution for use around skylights, rooflights and domelights up to 2 by 2m.

From Construction site safety

Permanent solution (1st April 2006)

The safety of rooftop workers, such as maintenance crews and external contractors, is assured at a hospital in Buckinghamshire following the installation of a roof edge protection system from Kee Klamp.

From Slips trips falls

Fitting range (1st October 2005)

At the A+A Exhibition in Dusseldorf (24 to 27 October) Kee Klamp will show its range of tubular solutions designed to ensure quick assembly and cost-effective performance in a range of health and safety applications.

From Slips trips falls

Low cost demarcation (1st October 2005)

A cost-effective demarcation system has been introduced by Kee Klamp for interior or exterior temporary barrier applications. Kee Mark, a modular, freestanding solution, is quick and easy to assemble, move and store.

From Premises

Quick assembly (1st August 2005)

To speed installation and reduce labour costs, Kee Klamp has developed a new rail fitting as an integral, standard component of its Kee Guard roof edge protection system.

From Construction site safety

Fittings allow quickassembly (1st June 2005)

In a joint venture with Circle 33 Housing Group, Kee Klamp has helped create secure, effective and family-friendly balcony guardrailing at the Leybridge Court development in London.

From Construction site safety

Fitting way to meet DDA (1st June 2005)

To help builders, contractors and specifiers ensure that commercial and public buildings satisfy the requirements of the Disability Discrimination Act and Building Regulations Pt.M:2004, Kee Klamp has introduced a range of galvanised iron fittings.

From Premises

Roof edge protection (1st April 2005)

A KeeGuard roof edge protection system from Kee Klamp forms a key part of Newcastle City Council�s health and safety initiatives for employees working at height.

From Slips trips falls

DESIGNED TO CUT RISK OF TRIPPING (1st December 2004)

Kee Klamp has launched an anti-trip safety initiative with its KGA 200 Coverstrip, a newly available accessory for its KeeGuard roof edge protection system.

From Slips trips falls

Smart connections (1st December 2004)

Waverley Borough Councils offices in Godalming can now be accessed with ease and safety following the installation of sturdy handrails that use fittings from Kee Klamp.

From Slips trips falls

Aiding a safe escape (1st December 2004)

Kee Klamp has satisfied important safety and aesthetic criteria at the Cheltenham Stake Centre, using Keenect balustrading and handrailing.

From Premises

Covers all angles (1st October 2004)

More than 22 000m of guardrailing connected by Kee Klamp fittings has been installed at the Psyttalia wastewater treatment plant, Athens Bay.

From Slips trips falls

Fitting answer to safety (1st October 2004)

Safety guardrailing featuring Kee Klamp fittings has been installed at the Waterdale Waste Disposal Site near St Albans to provide safety and security for people visiting the facility to recycle household waste.

From Premises

Roof edge protection (1st August 2004)

The new KeeGuard modular system is described by Kee Klamp as a breakthrough in roof edge protection.

From Slips trips falls

Hospitals roof remedy (1st June 2004)

At the North London Nuffield Hospital a KeeGuard roof edge protection system from Kee Klamp is helping to ensure compliance with best health and safety practice.

From Slips trips falls

Fitting in at the show (1st April 2004)

Kee Klamp has been keeping its high profile afloat by ensuring safety with style at this years Schroders London International Boat Show.

From Slips trips falls

Roof safety system (1st February 2004)

Kee Klamp has introduced Kee Anchor, a modular man anchor system that gives a safe, versatile and cost effective solution for workers assembling edge protection systems or carrying out other maintenance activities at roof level.

From Slips trips falls