Protects Caterpillar (1st October 2008)

Caterpillar Logistics has entrusted the safety of loading bay employees at its Tullamarine warehouse in Victoria, Australia, to Castell's Salvo. Caterpillar's goal was to implement a process on its loading bays that w

From Handling storing

Lockout features (1st August 2008)

Castell Iso-Lok's Doc Combo board combines the features of a lockable document holder with those of a safety lockout station and group lockout box. Securely keeping both the permit to work documents and lockout equipm

From Managing safety

  Driveaway prevention (1st August 2008)

Industrial safety specialist Castell has revamped its Salvo range of driveaway protection products with third-party installers and distributors in mind.

From Handling storing

Preventing drive-away (1st June 2008)

Diesel engine manufacturer, Cummins, has now adopted Castell's Salvo driveaway prevention system at its Darlington site, following a recommendation from the company's Daventry facility.

From Premises

Stops drive-aways (1st December 2007)

Recognising that a system of traffic lights and manual powering up of loading bays by drivers at its Hull factory failed to physically prevent a driver from leaving a bay prematurely, Birds Eye went to Castell for an a

From Premises

Communicating safely (1st April 2007)

Trapped key interlocking systems from Castell are being used to ensure that maintenance work at the BT Goonhilly International Communication Centre carries no risk to personnel.

Located near the Cornish coast, the site compr

From Plant machinery

Prevents drive-away (1st February 2007)

Birds Eye relies on Castell's Salvo to protect warehouse operatives at its Hull factory from the risk of unscheduled trailer departure.

Having recognised that its system of traffic lights and manual powering up of loading ba

From Premises

  Preventing drive-away (1st December 2006)

Wincanton has installed Castell's Salvo drive-away prevention system across all 11 loading bays of its West Thurrock site.

Drivers arriving at the site report to the operations office where they swap paperwork and gate pass

From Handling storing

Preventing incidents in the loading bay (1st December 2006)

Since installing a driveaway prevention system from Castell on six of the 17 loading bays at its Hatfield Peverel dairy in Essex, Arla Foods has not had a single health and safety incident reported on its loading bays.

Havin

From Premises

Keyless door interlock (1st April 2006)

Castell has expanded its drive-away prevention system Salvo with the introduction of Gallant, a keyless door interlock for manually-operated warehouse loading bay doors.

From Premises

Provides safe access (1st February 2006)

Trapped-key interlocks from Castell are protecting maintenance workers at an underground liquid hydrogen bus refuelling station near Hornchurch.

From Plant machinery

  No drive-away (1st December 2005)

Flextronics Logistics has invested in Castell's driveaway prevention system, Salvo, to ensure high security, time-critical procedures at its supply and distribution hub in Ireland pose no threat to the wellbeing of warehouse staff.

From Handling storing

THIN-HASP UNIT FOR MACHINE ISOLATION (1st August 2005)

A thin-hasp Multi-Clasp has been introduced by Castell Iso-Lok for machine isolation and is especially suited to locking-off switches with restricted access to the locking facility.

From Plant machinery

  Prevents drive-away (1st June 2005)

Wincanton has adopted a drive-away prevention system from Castell across its entire Gloucester site.

From Handling storing

ISO-LOK GOES TO UNUSUAL LENGTHS (1st June 2005)

A 340mm high padlock has been developed by Castell Iso-Lok for a customer who needed to secure a large set of keys, and is an example of the company’s ability to provide companies with bespoke solutions.

From Plant machinery

  Prevents drive-away (1st April 2005)

After a survey of anti-driveaway methods, supply chain management company, Wincanton, has adopted Castell’s Salvo system across its Gloucester site.

From Handling storing

Monitors most motors (1st April 2005)

Castell has developed an ASi-compatible motor safety relay that can monitor almost all electrical motors, including variable-speed drives.

From Plant machinery

Recovery made safer (1st February 2005)

A product recovery and waste minimisation system at the Nottingham site of PZ Cussons has brought time and cost savings.

From Plant machinery

Keeps keys clipped close (1st February 2005)

A self-retracting key reel that clips easily to any belt or pocket is available from Castell Iso-Lok.

From News

  Prevent drive-aways (1st February 2005)

Areport published by the HSE has highlighted the many potential dangers surrounding fork lift truck use. Safety of Industrial Lift Trucks states that, between April 1997 and March 2001, HSE inspectors investigated 1204 fork lift-related accidents in

From Handling storing

Gives risk-free access (1st December 2004)

Iggesund Paperboard uses a safety interlocking system from Castell to ensure risk-free access to machinery at its Cumbria-based mill.

From Plant machinery

SECURE STORAGE FOR PADLOCKS AND KEYS (1st December 2004)

A range of lockable metal storage cabinets has been introduced by Castell Iso-Lok for key and padlock management.

From Plant machinery

Trapped key system (1st December 2004)

A concrete mixing plant at Heathrow Terminal 5 has a trapped key interlocking system from Castell Safety International.

From Plant machinery

Picking the lock (1st December 2004)

Tim Hughes of Castell Iso-Lok considers why your choice of padlock supplier could be a life or death decision.

From Plant machinery

ANTI-LOCK-IN DEVICE SUITS SLIDING DOORS (1st December 2004)

Castell Safety International has developed a new version of its Entry Safe key interlock. Designed to control access to hazardous areas, it can be fitted to sliding as well as hinged doors.

From Plant machinery

Key to safety (1st October 2004)

Trapped key interlocking systems from Castell Safety International help ensure maintenance work at BT Goonhilly International Communication Centre carries no risk to personnel.

From Plant machinery

Protecting mill staff (1st October 2004)

BSW Timber has chosen interlocking systems from Castell Safety International to protect employees at its Newbridge-on-Wye sawmilll.

From Plant machinery

  Protects staff (1st August 2004)

Christian Salvesen has installed Castells Salvo system at its distribution site in Bury to protect staff from the risk of drive-aways.

From Handling storing

FOR HOSTILE AND CORROSIVE AREAS (1st August 2004)

For use in hostile and corrosive conditions, or for food processing and other clean room environments, Castell Iso-Lok now produces versions of most of its key products in hygienic, easy to clean, high polish stainless steel. The company has introduc

From Plant machinery

Lock not shock (1st August 2004)

Castell Iso-Lok has introduced an electrically insulated version of its Multi-Clasp for use when locking off electrical equipment. The clasp provides additional protection against electric shock in the unlikely event that it comes into contact with a

From Plant machinery

COVERS ENCLOSE VALVE HANDWHEEL (1st June 2004)

Available from Castell Iso-Lok, V-Safe valve covers protect against inadvertent or unauthorised operation of wheel-operated valves.

From Plant machinery

  SYSTEM STOPS FORK LIFT DRIVE-AWAYS (1st April 2004)

Castell has developed a new product, designed to protect fork lift drivers during loading/ unloading operations. It is offered at a price that the company says is a fraction that of alternative vehicle-restraint technologies.

From Handling storing

Mixer downtime cut (1st April 2004)

Productivity at Cabot Plastics has increased since trapped-key interlocking safety systems fitted to its Banbury mixers were modified by Castell Safety International in partner-ship with Vital Link.

From Plant machinery

BOOSTING SAFETY AT CHEMICAL SITE (1st April 2004)

When safety supplier Arco won a major contract on Teeside, it turned to Castell Iso-Lok for assistance.

From Plant machinery

UNNECESSARY DELAYS STOPPED (1st February 2004)

An animal feed manufacturer is using motion-monitoring products from Castell to minimise the impact of routine maintenance on productivity. BOCM Pauls has installed BEMF units on two of its pelleting presses to allow operatives to access them as soon

From Plant machinery

Isolate machinery (1st February 2004)

British Gypsum-Isover has specified locking off equipment from Castell Iso-Lok. All the production and maintenance staff have a personal padlock engraved with their name, and an attached danger board featuring their name and photograph. These are use

From Plant machinery

MORE PRODUCTIVE MIXERS AND MILLS (1st February 2004)

A motion monitoring product for use with trapped key access control systems has been developed by Castell. The BEMF unit ensures that motor-driven equipment with a variable run down time has completely stopped before access is possible. This avoids r

From Plant machinery